Straight Reducer Silicone Hose 4ply

Straight Reducer Silicone Hose

Materials and construction meet SAE J20R4 Class A silicone Standard jacket colour is black. Reinforcement is a knitted aramid yarn. R4 Inside Diameter tolerance is +/- 05mm for hose sizes less than 70mm and +/- 1.6mm for hose sizes 70mm and larger. R3 Inside Diameter and wall thickness tolerance is hose size specific 3mm - 5mm. Wall thickness is measured 4 places 90 degrees apart and averaged per SAE J20.  Wall thickness in the bend area of a curved hose may differ from the wall in the straight section by no more than 33% per SAE J20.
 
Inside Dia - Side 1 Inside Dia - Side 2 Part No. Length Thickness Colour Burst pressure  Wall Type
mm mm   mm mm   (Mpa) Ply
32 25 SRSH32-25 130mm 3mm - 5mm black 6Mpa - 17Mpa 4Ply
35 25 SRSH35-25 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
35 32 SRSH35-32 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 22 SRSH38-22 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 25 SRSH38-25 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 32 SRSH38-32 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
40 35 SRSH40-35 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
45 32 SRSH45-32 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
45 38 SRSH45-38 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
51 38 SRSH51-38 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
54 51 SRSH54-51 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
57 51 SRSH57-51 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
60 50 SRSH60-50 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 51 SRSH63-51 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 50 SRSH70-50 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 57 SRSH70-57 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 60 SRSH70-60 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 51 SRSH76-51 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 63 SRSH76-63 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
80 70 SRSH80-70 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
102 76 SRSH102-76 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
127 100 SRSH127-100 130mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply



45 Degree Silicone Elbows

ELbow Silicone Hose

Materials and construction meet SAE J20R4 Class A silicone Standard jacket colour is black. Reinforcement is a knitted aramid yarn. R4 Inside Diameter tolerance is +/- 05mm for hose sizes less than 70mm and +/- 1.6mm for hose sizes 70mm and larger. R3 Inside Diameter and wall thickness tolerance is hose size specific 3mm - 5mm. Wall thickness is measured 4 places 90 degrees apart and averaged per SAE J20.  Wall thickness in the bend area of a curved hose may differ from the wall in the straight section by no more than 33% per SAE J20.

 
Inside Dia.  Part No. Leg Length Thickness Colour  Burst pressure  Wall Type
mm   mm mm   (Mpa) Ply
7 E45-6.5 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
10 E45-9.5 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
13 E45-13 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
16 E45-16 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
19 E45-19 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
22 E45-22 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
25 E45-25 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
32 E45-32 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 E45-38 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
45 E45-45 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
48 E45-48 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
51 E45-51 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
54 E45-54 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
57 E45-57 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
60 E45-60 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 E45-63 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 E45-70 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 E45-76 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
83 E45-83 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
89 E45-89 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
102 E45-102 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply



90 Degree Silicone Hose Elbows

ELbow Silicone Hose

Materials and construction meet SAE J20R4 Class A silicone Standard jacket colour is black. Reinforcement is a knitted aramid yarn. R4 Inside Diameter tolerance is +/- 05mm for hose sizes less than 70mm and +/- 1.6mm for hose sizes 70mm and larger. R3 Inside Diameter and wall thickness tolerance is hose size specific 3mm - 5mm. Wall thickness is measured 4 places 90 degrees apart and averaged per SAE J20.  Wall thickness in the bend area of a curved hose may differ from the wall in the straight section by no more than 33% per SAE J20.

 

Inside Dia. Part No. Leg Length Thickness Colour Burst pressure  Wall Type
mm   mm mm   (Mpa) Ply
7 E90-6.5 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
10 E90-9.5 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
13 E90-13 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
16 E90-16 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
19 E90-19 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
22 E90-22 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
25 E90-25 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
32 E90-32 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 E90-38 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
45 E90-45 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
48 E90-48 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
51 E90-51 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
54 E90-54 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
57 E90-57 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
60 E90-60 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 E90-63 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 E90-70 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 E90-76 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
83 E90-83 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
89 E90-89 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
102 E90-102 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply

 

 

Straight Hump Hose

Hump Silicone Hose

Materials and construction meet SAE J20R4 Class A silicone Standard jacket colour is black. Reinforcement is a knitted aramid yarn. R4 Inside Diameter tolerance is +/- 05mm for hose sizes less than 70mm and +/- 1.6mm for hose sizes 70mm and larger. R3 Inside Diameter and wall thickness tolerance is hose size specific 3mm - 5mm. Wall thickness is measured 4 places 90 degrees apart and averaged per SAE J20.  Wall thickness in the bend area of a curved hose may differ from the wall in the straight section by no more than 33% per SAE J20.

 

Inside Dia. Part No. Length Thickness Colour Burst pressure  Wall Type
mm   mm mm   (Mpa) Ply
38 SHH38 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
51 SHH51 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
60 SHH60 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
57 SHH57 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 SHH63 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 SHH70 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 SHH76 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
89 SHH89 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
102 SHH102 175mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply

 

 

90 Degree Reducing Silicone Hose Elbows

Elbow Reducer Silicone Hose

Materials and construction meet SAE J20R4 Class A silicone Standard jacket colour is black. Reinforcement is a knitted aramid yarn. R4 Inside Diameter tolerance is +/- 05mm for hose sizes less than 70mm and +/- 1.6mm for hose sizes 70mm and larger. R3 Inside Diameter and wall thickness tolerance is hose size specific 3mm - 5mm. Wall thickness is measured 4 places 90 degrees apart and averaged per SAE J20.  Wall thickness in the bend area of a curved hose may differ from the wall in the straight section by no more than 33% per SAE J20.

 

Inside Dia - Side 1 Inside Dia - Side 2 Part No. Leg Length Thickness   Burst pressure  Wall Type
mm mm   mm mm   (Mpa) Ply
25 19 ER90-25-19 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 25 ER90-38-25 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
38 32 ER90-38-32 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
60 50 ER90-60-50 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 51 ER90-63-51 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
63 57 ER90-63-57 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
76 63 ER90-76-63 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply
70 50 ER90-70-50 160mm 3mm - 5mm black 6Mpa - 17Mpa 4 Ply